Raw Materials for Egoza Razor Wire
When installing a security system based on Egoza razor wire, its long and trouble-free service life is assumed. However, it often happens that after 2-3 years of operation, noticeable elements of corrosion appear on the barbed wire and soon the barbed wire becomes unusable. This happens when low-quality materials are used in the production of https://barbedwire.com.ua/en Egoza razor wire, or sheet steel with a poor anti-corrosion coating, or similar spring wire, or both together. In order to help prevent such a purchase, below we will indicate the recommended materials for the manufacture of Egoza razor wire.
Rolled Steel Tape for Egoza Razor Wire
In the production of Egoza razor wire, it is recommended to use rolled steel tape with a thick, high-quality zinc coating. The recommended steel thickness for Egoza razor wire https://barbed-wire.kz/en can be 0.5...0.55 mm, but in some reinforced modifications of Egoza razor wire, the steel thickness can reach 0.7 mm.
- heat-resistant and heat-resistant steel, corrosion-resistant according to GOST 7350-77
- thin-sheet galvanized steel according to GOST 14918
- cold-rolled tape made of heat-resistant and corrosion-resistant steel according to GOST 4986-79
Steel Wire Used for Reinforcing Egoza Razor Wire
Wire used for reinforcing Egoza razor wire must have pronounced spring properties and high strength. Recommended types of wire for use in the production of Egoza razor wire
- Galvanized rope wire GOST 7372-79
- Galvanized steel wire GOST 9850-72
Anti-Corrosion Coating of Egoza Razor Wire
One of the most important qualities of materials used for the production of Egoza razor wire is their anti-corrosion coating. Both steel wire and steel tape https://egoza.org/ must have a thick, high-quality zinc coating. The use of materials with partial or damaged anti-corrosion coating in the production of Egoza razor wire is not allowed.